|
HI-6 Multi-Spark Capacitive Discharge
Ignitions
|
|
.jpg) |
|
| Crane Cams’ Fireball HI-6 is the most powerful ignition
of it’s type available! The HI-6 is a multiple spark, capacitive discharge
electronic ignition designed for high performance street, drag racing, oval
track and marine applications. The Fireball HI-6 utilises the latest state
of the art technology and when used with the recommended Crane coil, delivers
a spark gap current almost ten times greater than that of the stock ignition.
This high spark gap current produces fast growth of the initial flame kernel
and a stable flame front, for greatly increased combustion efficiency. Dyno
tests show significant power gains that result in reduced track times, lower
ET’s and higher MPH! MULTIPLE SPARK TECHNOLOGY Ensures complete combustion DIGITAL ADJUSTABLE REV LIMITER No chips needed- adjustable in 100rpm increments from 500 to 9,000rpm. EQUENTIAL REV LIMITING TECHNOLOGY All cylinders are fired equally at the rev limit, eliminating engine and drivetrain stress. REGULATED POWER SUPPLY Fireball HI-6 maintains a constant ignition output even if battery drop to 6 volts. |
|
| Description | Part Number |
| HI-6 Ignition-Black Finish | CR6000-6420 |
|
White Wire Oprical Trigger
|
|
| Enhanced version of the popular optical trigger used in Crane Fireball XR700 and XR3000 points conversion ignition systems. Additional circuitry provides a trigger signal to any ignition system with Points/Module input | |
| Description | Part Number |
| White Wire Optical Trigger HI-6, HI-6S, HI-2000, HI-6R, HI-6TR | CR715-0020 |
|
Performance Ignition Coils
|
|
| PS20 Premium Street Coil | |
| High output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. Designed for use with Crane HI-2000, HI-6500, XR700 and XR3000 ignitions. For general purpose use in applications when engine RPM does not exceed 6500RPM. Includes ballast resistor for points applications. Black finish | |
| Description | Part Number |
| Crane Oil filled Ignition Coil PS20 (black finish) | CR730-0020 |
 |
|
| PS40 Premium Street Coil | |
 |
|
| Electrical characteristics and applications same as PS20. Chrome appearance | |
| Description | Part Number |
| Crane Oil filled Ignition Coil PS40 (Chrome finish) | CR730-0040 |
| PS60 Performance Coil | |
.jpg) |
|
| Special low resistance windings. Output characteristics similar to Crane PS91 Coil. Designed for extended use such as road racing, off road and high RPM street engines. Compatable with all OE electronic ignitions. Recomemnded for use with Crane HI-6500, XR300 and HI6. Not for use with points, | |
| Description | Part Number |
| Crane Oil filled Ignition Coil PS60 (Chrome finish) | CR730-0060 |
|
Fireball E-Coils
|
|
|
Crane Cams FireBall E-Core coils produce
up to 70% more spark energy than stock coils with outstanding reliability.
Use of a Crane FireBall coil is mandatory to realise the maximum power
output provided with Crane FireBall ignitions!
Up to 70% greater spark energy than stock coils protected against heat, moisture, shock & vibration provides maximum spark energy for the crane fireball ignitions compatible with oe ignitions for recommended applications |
|
| PS91 E-Core Coil | |
.jpg) |
|
| High output E-Core ignition coil. For street use with FireBall HI-6, Mallory Hyfire and MSD 6 CD systems. Works great with Crane HI-6S, HI-2000, HI-6500 and XR3000. Use with XR700 if ballast resistor is added (not supplied). NOT FOR USE WITH POINTS | |
| Description | Part Number |
| PS91 High Output E-Core Ignition Coil | CR730-0091 |
| PS92 Pro Race Coil for use with CDI Systems | |
.jpg) |
|
| Professional race coil for use with CD systems only. Recommended for maximum performance with Crane HI-6 systems. Produces up to 12 times greater output than OE. Replacement coil for Crane HI-7 system. Can be used with Mallory Hyfire, MSD 7 and MSD 8 systems. CAUTION: MSD 6 systems are not capable of driving the high current demanded by the PS92. Not compatible with Crane HI-6S systems. Includes nickel plated bracket. | |
| Description | Part Number |
| PS92 High Output E-Core Ignition Coil | CR730-0092 |
|
XR700 Points-To-Electronic Ignition
Conversion Kits
|
|
.jpg) |
|
| The Fireball XR700 is designed for replacement of breaker points and failed OE modules in street driven vehicles. XR700 units are compatible with the original coil and ballast resistor. Because there are no contact points or rubbing block to wear out, you set the engine timing once. | |
| Description | Part Number |
| XR700 - Ford V8, Acc34, Delco 4,6,8 | CR700-0226 |
| XR700 - Bosch, Lucas, Jap 4,6,8Cyl, Mallory/Marelli 4 Cyl | CR700-0231 |
| XR700 - Lucas 4,6,8,12 Cyl | CR700-0300 |
| XR700 - Mallory V8 YL & Unilite | CR700-0309 |
|
XR3000 Points-To-Electronic Ignition
Conversion Kits
|
|
.jpg) |
|
| The XR3000 points conversion ignition is the high performance version of the proven XR700, and produces up to 150% greater spark gap energy than stock points-type systems , significant extension of the upper RPM ignition performance limit. Allows use of high output coils without requiring ballast resistor. Suit most points type distributors. Maximises spark duration, for quicker starting and responsive off-idle performance. | |
| Description | Part Number |
| XR3000 - Ford V8, Acc 34, Delco 4,6,8 Cyl | CR3000-0226 |
| XR3000 - Bosch, Lucas, Jap 4,6,8 Cyl | CR3000-0231 |
| XR3000 - Lucas OPUS 4,6,8,12 Cyl | CR3000-0300 |
| XR3000 - Mallory V8 YL & Unilite | CR3000-0309 |
|
XR700 & XR3000 Parts
|
|
| Ignition Modules & Optical Triggers | |
| Description | Part Number |
| XR700 Ignition Module | CR700-0001 |
| Optical Trigger for XR700 or XR3000 | CR700-0020 |
| XR3000 Ignition Module | CR3000-0001 |
|
Installation Kits
|
|
| Description | Part Number |
| Installation Kit Ford V8, Accel 34, Delco 4,6,8 Cyl | CR700-2226 |
| Installation Kit Bosch, Lucas, Jap 4,6,8 Cyl | CR700-2231 |
| Installation Kit 4,6,8,12 Cyl Lucas Elec | CR700-2300 |