FORD CLEVELAND
Falcon, Fairlane, F100, 302-351 1964-84 * See Fitting Notes*
Hydraulic Lifter Camshafts
PART NO. VALVE TIMING DUR .050" DUR. VALVE LIFT POWER RANGE PART KIT COMMENTS
21613 IN.16/58
EX.65/19		 254
264		 194
202		 .441"
.470"		 1000
3800		 K2102 High torque fuel efficient cam with smooth idle.
217711,2 IN.18/60
EX.62/20		 258
262		 200
205		 .460"
.470"		 1200
4200		 K2102 Torque/Economy cam for towing and LPG vehicles.
216021,2 IN.26/64
EX.66/24		 270
270		 208
208		 .484"
.484"		 1500
4400		 K2102 Mild street cam with smooth idle and good low end torque.
216661,2 IN.25/65
EX.74/26		 270
280		 204
214		 .484"
.510"		 1600
4600		 K2102 Dual pattern economy/performance cam for stock to mild engines.
216031,2 IN.32/68
EX.72/28		 280
280		 214
214		 .510"
.510"		 2000
5000		 K2102 Mild street cam for street engines with improved carburation and extractors.
216651,2 IN.30/70
EX.79/31		 280
290		 214
224		 .507"
.536"		 2200
5500		 K2102 Mild idle with strong mid range suits modified street engines.
216861,2 IN.33/67
EX.69/31		 280
280		 224
224		 .502"
.502"		 2500
5700		 K2103 Fair idle requires only minor engine modifications.
2113675 IN.33/73
EX.78/35		 286
293		 226
232		 .530"
.548"		 2700
5800		 K21043 Popular hot street cam which delivers strong strip performance.
216495 IN.34/68
EX.77/39		 282
295		 234
244		 .525"
.525"		 3000
6000		 K21043 Lumpy idle, high performance cam for highly modified engines.
217005 IN.45/79
EX.87/49		 304
316		 242
250		 .570"
.570"		 3500
6500		 K21043 Rough idle for street/race applications with 3.5:1 or lower diff.
216485 IN.52/86
EX.91/53		 318
323		 248
252		 .567"
.584"		 3800
6800		 K21043 Maximum performance street/race hydraulic cam. Rough idle , needs low gears.
21900 Custom ground billet, Hydraulic profile using selected master.
21901 Custom ground billet, Hydraulic profile using 2 master or modified lobe centre.
Solid Lifter Camshafts
PART NO. VALVE TIMING DUR .050" DUR. VALVE LIFT POWER RANGE PART KIT COMMENTS
217735 IN.32/68
EX.77/33		 280
290		 232
242		 .510"
.532"		 2700
5700		 K21053 Mild performance solid lifter cam.
216265 IN.30/68
EX.72/30		 278
282		 238
244		 .560"
.570"		 3000
6000		 K21053 Medium idle, strong mid range power, for well prepared street engines.
218065 IN.42/76
EX.81/43		 298
304		 248
255		 .564"
.585"		 3500
6500		 K21053 High performance solid lifter cam for street/race applications.
217315 IN.43/77
EX.81/44		 300
305		 253
260		 .612"
.625"		 4000
7200		 K21053 Max. performance solid lifter cam for race only applications. Full race valve train must be used
21900 Custom ground billet, Hydraulic profile using selected master.
21901 Custom ground billet, Hydraulic profile using 2 master or modified lobe centre.
FITTING NOTES
* Performance springs and retainers MUST be used on all Cleveland engines fitted with modified camshafts.
* The use of high volume oil pumps in these engines will cause premature wear of the distributor gear.
* Convertor stall speed should be equal to or greater than the minimum rpm of the cam power range.
 
1. Must use performance springs 4. Must use performance seal
2. Must use performance retainers 5. Notes 1 to 4 all apply to this part number
3. Machining required to fit these components    
Roller Lifter Camshafts, Solid or Hydraulic
PART NO. DESCRIPTION
21950 Roller cam custom ground on induction hardened steel billet.
Performance Matched Valve Train Kits
KIT NO. VALVE LIFTER VALVE SPRING SPRING RETAINER VALVE COLLETS VALVE SEALS PUSH RODS TIMING SET COMMENTS
K2102 HT900R 7738 127008 117028 HR229 PR-4146 CS8351C Suit mild cams.
K2103 HT900R 7737 127008 117028 HR229 PR-9506 CS8351C Suit hot cams to .540" lift.
K21043 HT900R 73333 127008 117053 S23 PR-9506 CS8351C Suit hot cams to .740"lift.
K21053 AT2000 73333 127008 117053 S23 PR-9556 CS8351C Suit hot solid cams to 740" lift.
K21063 AT2000 73313 131018 11101 S23 PR-9556 CS8351C Suit solid race cams to 900" lift.
K21093 5300 99503 13102 11101 S23 PR-9556 CS8351C Roller lifter kit to .740" lift.
Performance Valve Train Components
PART NO. DESCRIPTION PART NO. DESCRIPTION
PR-309 Standard replacement pushrod. CS8351C Multi Keyway, Roller Timing Set
PR-309B +0.060" replacement pushrod. HT900C Hydraulic Lifter
PR-950 Super Duty Pushrod 0.080" Wall Hardened HT900R Anti Pump Up Hydraulic Lifter
PR-955 Super Duty Pushrod + 0.100" AT2000 Solid Lifter
PR5840 Standard length 5/16" race pushrod 5300 Roller Lifter Set
PR5845 +0.050" race pushrod 11702 Hardened Multi Groove Collets
PR5850 +0.100" 5/16" race pushrod 11701 Hardened Single Groove Collets
PR8840 Standard length 3/8" race pushrod 4133 Forged single Groove Collets Std Height
PR8850 +0.100" 3/8" race pushrod 4134 Forged single Groove Collets +0.050"
BG6 .53" Bronze Distributor Gear suit roller cams 11705 M/C 1 Groove Collets (use with 12700,12710 retainer)
GP351 Stepped Guideplate Suit 5/16" Pushrods 11101 10 degree Single Groove Collets Std Height
CCG351 2V Cam Change Gasket Set 11150 10 degree Single Groove Collets + 0.050"
CCG351 4V 4V Cam Change Gasket Set VI351 4V Single Groove Inlet Valves.
34301 Valve Lash Cap VE351 4V Single Groove Exhaust Valves
Spring Retainer and Lock Details
VALVE STEM SPRING HEIGHT RETAINER HARD LOCKS RACE LOCKS9
4 Groove Standard - 1.820" 12700 11702  
4 Groove +0.100" - 1.920" 12710 11702  
Single Groove Standard - 1.820" 11700 11701 4133
Single Groove Standard - 1.820" 12700   11705
Single Groove +0.050" - 1.870" 11700   4134
Single Groove +0.100" - 1.920" 11710 11701 4133
Single groove +0.100" - 1.920" 12710   11705
Single groove 10 deg. +0.100" - 1.920" 13101 (1.437"dia.spring)
13102 (1.550"dia.spring) 		  11101
Single groove 10 deg. +0.190" - 2.110" 13101 (1.437"dia.spring)
13102 (1.550"dia.spring)		   11150
FITTING NOTES
1. Must use performance springs 4. Must use performance seal
2. Must use performance retainers 6. Check valve train geometry before ordering pushrod.
3. Machining required to fit these components 8. Check table before ordering retainers and locks.
    9. Machined or Forged Locks